RV Repair Winter Garden provides mobile rv water heater anode rod throughout Orange, Lake, and Osceola counties. Our certified technician comes to your wherever your RV is parked. Flat-rate pricing quoted before we start - no towing required.
Our certified mobile technicians provide rv water heater anode rod throughout Winter Garden and all of Orange, Lake, and Osceola counties. We come to your wherever your RV is parked - no towing, no shop drop-off required.
Feat Ac Repair in Winter Garden, FLFeat Slide Out in Winter Garden, FL
Flat-rate pricing is given before any work begins. You approve the price, we do the work. Available 7 days a week, 7 AM to 8 PM.
1Call us with the details. Tell us about the rv water heater anode rod issue and where your RV is located. We provide a flat-rate quote over the phone.
2Tech dispatched to your location. A certified technician drives to your wherever your RV is parked with the tools and parts needed.
3Repaired on-site, same day. Most rv water heater anode rod jobs are completed in a single visit. No waiting, no shop drop-off, no towing fees.
4Pay only what was quoted. The price you approved upfront is the price you pay. No surprise charges after the fact.
Inspect every 12 months and replace when consumed to less than half its original diameter. In Central Florida's moderately hard water, most anode rods need replacement every 2 to 3 years. Some owners in high-sulfur well-water areas need annual replacement due to accelerated consumption.
A fully consumed anode rod leaves the steel tank wall unprotected. Without sacrificial metal, the tank lining begins to corrode directly, leading to water discoloration, rotten egg odor from bacteria in the compromised lining, and eventually pinhole leaks. Tank replacement is far more expensive than annual anode rod inspection.
Suburban 6-gallon models take a standard 3/4-inch NPT magnesium or aluminum/zinc anode rod, approximately 3 inches long. The 10-gallon Suburban uses a similar fitting.
We carry replacement rods for the most common Suburban models. The rod is located at the water heater drain opening on the exterior access panel.
Magnesium anodes provide stronger protection but react more aggressively with certain water conditions, producing the rotten egg sulfur smell. Aluminum/zinc anodes (sometimes called zinc-aluminum) provide adequate protection without the sulfur reaction and are recommended for Florida RVers who experience the rotten egg issue.
Let the tank cool fully, drain it, and apply penetrating oil (PB Blaster or equivalent) around the fitting threads. Let it soak for 30 minutes.
Use a 1-1/16 inch socket with a breaker bar - not a ratchet - with the leverage applied in a steady pull rather than a jerk. An impact wrench at low torque can break the rod loose without rounding the fitting.
Yes - combination anode/element units are available that fit the Suburban anode rod opening and add 120V electric heating capability to a gas-only water heater. This is a popular upgrade for Suburban gas-only units, adding electric mode for about $45 in parts. We install these on mobile calls.
If your water heater is an Atwood or Dometic brand (now sold together), there is no anode rod - the aluminum tank is self-protecting and doesn't need one. Only Suburban and some aftermarket steel-tank units require an anode rod. Confirm your brand before purchasing one.
Yes - Orange County water is moderately hard (200 to 300 ppm), which accelerates anode rod consumption compared to softer water areas. We recommend annual inspection for Winter Garden RVers. Well water with high sulfur content in surrounding Lake County accelerates consumption further.
After draining the tank, the first water out when removing the anode rod is often slightly brown or gray - this is normal sediment and anode byproduct. Heavy black discoloration indicates significant anode consumption. Bright white flakes in the water are calcium deposits from the Florida water supply, not a tank problem.
Use Teflon tape - 3 to 4 wraps on the NPT threads. Pipe thread compound (pipe dope) can contaminate the water supply and is not recommended inside potable water systems. Tighten to snug plus 1/4 turn with a wrench - over-tightening strips the plastic or aluminum threads in the tank fitting.
FAQ
Common Questions
Inspect every 12 months and replace when consumed to less than half its original diameter. In Central Florida's moderately hard water, most anode rods need replacement every 2 to 3 years. Some owners in high-sulfur well-water areas need annual replacement due to accelerated consumption.
A fully consumed anode rod leaves the steel tank wall unprotected. Without sacrificial metal, the tank lining begins to corrode directly, leading to water discoloration, rotten egg odor from bacteria in the compromised lining, and eventually pinhole leaks. Tank replacement is far more expensive than annual anode rod inspection.
Suburban 6-gallon models take a standard 3/4-inch NPT magnesium or aluminum/zinc anode rod, approximately 3 inches long. The 10-gallon Suburban uses a similar fitting.
We carry replacement rods for the most common Suburban models. The rod is located at the water heater drain opening on the exterior access panel.
Magnesium anodes provide stronger protection but react more aggressively with certain water conditions, producing the rotten egg sulfur smell. Aluminum/zinc anodes (sometimes called zinc-aluminum) provide adequate protection without the sulfur reaction and are recommended for Florida RVers who experience the rotten egg issue.
Let the tank cool fully, drain it, and apply penetrating oil (PB Blaster or equivalent) around the fitting threads. Let it soak for 30 minutes.
Use a 1-1/16 inch socket with a breaker bar - not a ratchet - with the leverage applied in a steady pull rather than a jerk. An impact wrench at low torque can break the rod loose without rounding the fitting.
Yes - combination anode/element units are available that fit the Suburban anode rod opening and add 120V electric heating capability to a gas-only water heater. This is a popular upgrade for Suburban gas-only units, adding electric mode for about $45 in parts. We install these on mobile calls.
If your water heater is an Atwood or Dometic brand (now sold together), there is no anode rod - the aluminum tank is self-protecting and doesn't need one. Only Suburban and some aftermarket steel-tank units require an anode rod. Confirm your brand before purchasing one.
Yes - Orange County water is moderately hard (200 to 300 ppm), which accelerates anode rod consumption compared to softer water areas. We recommend annual inspection for Winter Garden RVers. Well water with high sulfur content in surrounding Lake County accelerates consumption further.
After draining the tank, the first water out when removing the anode rod is often slightly brown or gray - this is normal sediment and anode byproduct. Heavy black discoloration indicates significant anode consumption. Bright white flakes in the water are calcium deposits from the Florida water supply, not a tank problem.
Use Teflon tape - 3 to 4 wraps on the NPT threads. Pipe thread compound (pipe dope) can contaminate the water supply and is not recommended inside potable water systems. Tighten to snug plus 1/4 turn with a wrench - over-tightening strips the plastic or aluminum threads in the tank fitting.
RV Problem? We Come to You.
Same-day service across Winter Garden and all of Central Florida. Guaranteed flat-rate pricing before we start.